Using Tasmota for Homeautomation

IOT Jan 11, 2024

Actually, I will set up many Temperature sensors in my house, so I figured out that I can use Tasmota for setting up a sensor that measures only the temperature at the current place. I think this is a good option instead of building my own library and getting errors and so on. So why not use a ready one?

Hardware Bucketlist

My bucket list contains the following parts

  • ESP Device
    There are various elements, just look for one with few GPIO and deep sleep capacity like the esp01 or In this article, I use the Wemos D1 mini, because this was already on my table ;)
  • DHT11 / DHT12
    You can use one of them if you want more accuracy and only temperature you can also use the DSB Temperature Sensor